Showing posts with label antenna. Show all posts
Showing posts with label antenna. Show all posts

3/25/2012

CB BASE ANTENNA Review

CB BASE ANTENNA
Average Reviews:

(More customer reviews)
Solarcon A-99 vertical antenna...

Easy to assemble, lightweight, all hardware and instruction manual included in package.

10 minutes from delivery to "on-the-air."

I get greatly improved signal reports versus my old antenna (Radio Shack "Crossbow" vertical).

I use it for CB and 10 Meter ham radio.

(Ignore the "9.9dBi" gain number. No vertical is going to deliver that kind of performance, but for its intended use, it works well.)

Click Here to see more reviews about: CB BASE ANTENNA

Product Description:
Solarcon A-99 17' Omni-Directional Fiberglass Base Station Antenna - 2000 Watts (1 Each)

Buy NowGet 17% OFF

Want to read more honest consumer review about CB BASE ANTENNA now ?

2/08/2012

Terk FDTV1A Flat Digital Omni Directional Amplified Indoor Antenna (Black) Review

Terk FDTV1A Flat Digital Omni Directional Amplified Indoor Antenna
Average Reviews:

(More customer reviews)
I bought a Terk TV-55 antenna around a decade ago (still sold today), since it was one of the most expensive antennas around, and I was hoping there was something to it.

It worked, but I've never been convinced it does any better than more traditional antennas.It does do a better job since the digital transition, but I had to play with it's positioning quite a bit to get everything to come in.

Originally I figured I'd pick up another one of those, but when I saw this, I thought I might as well take a chance on a newer design.

Pulling it out of the box, it's amazing how small and light it is compared to my TV-55...it had me skeptical that it could really do as well.

Before hooking it up, I used the signal strength indicator on my Tivo HD to check how well each station was coming in, so that I could see if this antenna really did better or worse...

I swapped antennas, threw this FDTV1A on a chair near where I have my TV-55, and checked again.To my pleasant surprise, EVERY channel comes in stronger.Channels that were above 80% already are now maxed out at 100.Channels below that have all gained at least 10+ to 30 on the signal meter.I even seem to be able to pull in one station from another market decently that didn't come in at all on the TV-55.

And all that was without doing any more positioning than just throwing it on a chair next to my TV-55 (which is by an outside wall).(I should note that I have channels coming several different directions, so on my TV-55 it's challenging to find an orientation that gets all of them decently-this model really does seem to be omnidirectional, or at least far more so than a normal antenna).

So I'm very happy with this thing's performance so far, and would absolutely recommend it.For YEARS I've wondered why someone couldn't make a better antenna, with all the technology we have now...and it looks like they actually did.

The small size, and small AC adapter are nice too.

One note-if you're already getting channels in super strong, I've heard there's a chance that amplifying them may actually make them worse.I didn't have that happen in my situation at all.Even the channels that were already at 92 or 96 on my signal strength meter just bounced up to 100 without issue, but possibly some people might want to try it without plugging in the amplifier, if their signals are already super strong.

Click Here to see more reviews about: Terk FDTV1A Flat Digital Omni Directional Amplified Indoor Antenna (Black)

Product Description:
TERK digital flat indoor antenna has a patented reception technology that outperforms traditional antennas. 360 degree reception pattern eliminates the need for constant adjustments. The removeable Extremely Low Noise (ELN) amplifier provides maximum flexibility and performance and gives you outstanding digital TV reception without saturating the signal. its high-gain design picks up further stations. This antenna is optimized for HDTV reception and has a flat profile designed to blend in with today's high-end HDTV systems. Comes with a 3 way mounting bracket so it can hang, stand up, or lay flat. Has 1 year limited warranty.

Buy NowGet 47% OFF

Want to read more honest consumer review about Terk FDTV1A Flat Digital Omni Directional Amplified Indoor Antenna (Black) now ?

1/09/2012

Midland 18-258 40-Channel Glass-Mount CB Antenna Review

Midland 18-258 40-Channel Glass-Mount CB Antenna
Average Reviews:

(More customer reviews)
This is kind of a follow-up on my review of the cb radio I bought with this. Again, this was more of an installation hassle than I expected. If you buy this you just need to realize it means permanently gluing anantenna to your window. . .

Click Here to see more reviews about: Midland 18-258 40-Channel Glass-Mount CB Antenna

Product Description:
40 channel CB reception, through the glass mounting, 12 feet of prewired cable, uniquely designed antenna makes installation simple

Buy NowGet 15% OFF

Want to read more honest consumer review about Midland 18-258 40-Channel Glass-Mount CB Antenna now ?

12/23/2011

Hawking HiGain Signal Booster version 2 - HSB2 Review

Hawking HiGain Signal Booster version 2 - HSB2
Average Reviews:

(More customer reviews)
I want to start by qualifying my comments - I'm a 16-year IT professional.I'm an MCSE (Microsoft Certified Systems Engineer) certified from Windows NT 3.51 up to present (Windows 2003).I am also an MCT (Microsoft Certified Trainer) had have taught Microsoft technologies for over 12 years.

The first thing to understand about the product line from Hawking Technologies is this:these are not Fischer Price toys.When you get into the arena of boosting signals of your wifi network...or extending...or repeating the wireless signals of your wifi network....you are dealing with intermediate to advanced technology implementation.

I am reading through the reviews on this product and there seems to be this recurring "expectation" by various people....that they are buying a fool-proof product that will install itself.Well.....that's not the case and these people bring on their own frustrations.

Hawking Technologies offers this signal booster product so that you can add it to your existing WIFI router.As such there is ALWAYS a chance of compatibility issues.There is no "magic way" to make a third-party product compatible with every vendor's router.That's just not realistic.

Still, I have recommended and installed this particular booster product for at least three dozen SMB clients (small-to-medium-sized businesses) throughout NJ and NY.I have had fantastic results with each application and have not seen a SINGLE INSTANCE where the product failed after a short time period (something I've read from some reviewers).

I have been recommending, installing and supporting this product for approximately four years now (beginning with the company's first version and now their revised implementation; which is almost identical).

Furthermore, my experience with Hawking technical support has been very good; compared to that of much larger companies (such as Dell....whom I believe have the worst technical support of any large technology vendor).

Perhaps Hawking has "outsourced" their customer service to a third-world sweat shop in India just as every other medium or large IT vendor has in the US.Don't get mad at the vendor for that, people.....get mad at your politicians and our country's legislation; which makes it profitable and financially practical for this scenario.Yes, I absolutely HATE IT when I have to deal with broken-English, non-professional and disgracefully underqualified customer support people in sweat shops.These people are earning ten cents an hour with no bathroom breaks....so what can we expect?

And with regard to the inaccurate owner's manual....well.....that is valid but NOT MAJOR!!Yes, Hawking needs to revise their installation manuals such that they are accurate and easily digestible.It's silly that they haven't remediated that problem yet; considering that the paperwork is for a best-of-class product.Still......this is ADVANCED TECHNOLOGY and people can't rely on a manual in order to make this product work for them.You may need an SMA to TNC adapter; depending on your application.Any local Radio Shack should have in stock what is needed to make it plug in.I suggest packing up both the router and the booster and bring it right to your nearest Radio Shack.Have the counter guys and gals gather up for you the couplings and cables that you need for connectivity.

What matters most of all is that this product is the best booster available for the price range and for the class of application (home usage).I have installed MANY of these into mission-critical business environments and have enjoyed outstanding results EVERY TIME.....WITHOUT EXCEPTION.

Additionally....someone mentioned a health risk associated with using this product at the maximum setting. RUBBISH!!!IN A PIG'S EYE!!!People really make me laugh.As one of my mentors once said....."The Internet is a cesspool of misinformation so beware".True indeed!

I have installed industrial, omnidirectional WIFI towers that emit a hundred thousand times the radiation as this product.These towers are only dangerous when a human stands right in front of them.From five feet away....there is no health risk.Thus, the notion that this small device is a health risk is complete made-up nonsense.Go ahead and put the device in the cage with your gerbil and it will live a long, healthy life.

Lastly....the noise that this device creates is so insignifigant....I can't believe how many people are complaining about it.You can only hear it when you're right on top of the unit so it will only be an issue if you intend on strapping the booster to the side of your head.If not (hopefully NOT!!!) there is no concerns about the noise.Put it in the corner next to your WIFI router and it won't bother anyone...I PROMISE!!

I do not give up five-star recommendations easily but Hawking Technologies is one of those companies that excels infinitely at their specialized market nitche.This signal booster is the "only show in town" and I whole-heartedly recommend it above all others.When you receive it and open the box, you will be immediately impressed by the obvious workmanship and engineering that went into it.

Not only will it improve signal strength throughout your home or office but it will improve your wifi throughput SUBSTANTIALLY in every way.

IMPORTANT NOTE:When you use a signal booster, you increase your SECURITY RISK enormously.Your neighbors may pick up on your boosted signal even stronger than their own indoor wifi router signal.You will have effectively offered your WIFI network to an extended and unwelcomed audience.Accordingly.....be SURE to revamp your wifi router's security.Use WPA instead of WEP if all your machines are compatible (WEP is, for all intents and purposes....fairly hackable).Use STRONG passwords for wifi access to your network.Be sure that your firewall is properly setup.Exercise as much security as is possible without compromising your network's functionality.

And stop thinking about it and buy this product.You'll be GLAD that you did (believe it).

PS: This is a purely objective review of Hawking Technologies' signal booster product.I'm not affiliated with the company.I simply call 'em as I see 'em.

Click Here to see more reviews about: Hawking HiGain Signal Booster version 2 - HSB2

Product Description:

The HSB2 IEEE 802.11b/g Wi-Fi Signal Booster for IEEE 802.11b/g Wi-Fi networks, boosts the signal and performance ofwireless networks. The unique Adjustable Power Settings feature of the HSB2 IEEE 802.11b/g Wi-Fi Signal Booster controls the range and power output (100mW to 500mW) of wireless network for security purposes and specific applications to only cover a certain area.


Main Features
Manufacturer: Hawking Technologies, Inc
Manufacturer Part Number: HSB2
Manufacturer Website Address: www.hawkingtech.com
Product Type: Wireless Range Extender
Frequency Band/Bandwidth: 2.4 GHz to 2.5 GHz IEEE 802.11b/g ISM Band
Form Factor: Wall-mountable
Standard Warranty: 2 Year(s)



Buy NowGet 16% OFF

Want to read more honest consumer review about Hawking HiGain Signal Booster version 2 - HSB2 now ?

10/14/2011

2' FIRESTIK ORIGINAL 5/8 WAVE BLACK Review

2' FIRESTIK ORIGINAL 5/8 WAVE BLACK
Average Reviews:

(More customer reviews)
I had a FireStik KW2-B on one of my previous cars for about 3 years and was pleased with it; however, if your mount can support a KW4 (or longer if feasible), the result will be longer range.My KW2 was mounted on the trunk deck using a gumdrop mount.I also have a KW4-W on one of my current vehicles and this review is relatively the same as my review of that antenna...It's a durable antenna that's made in the USA.The antenna is top loaded (coil is at the top) and has a fiberglass whip.If you are new to CB radio, don't forget that you'll also need a mount, coax cable, and an SWR meter for tuning the antenna.More information on tuning the antenna is available on the FireStik website (at the bottom of this product's page or under "Tech Help").I'd recommend reading FireStik's "Tech Help" section and taking their advice when shopping for an antenna:"At least two-thirds of the antenna should be above a vehicles roof line for optimum performance."This antenna adjusts by removing the rubber cap and trimming the antenna down with a pair of diagonal pliers.Be warned that, if you over-trim, you'll be looking at adding a spring or quick disconnect between the antenna and the mount in order to lengthen the antenna again.If you want an antenna that is screw adjusted, take a look at the Firestik II FS series with the tunable tip.Over-all, I believe this is a great antenna.

Click Here to see more reviews about: 2' FIRESTIK ORIGINAL 5/8 WAVE BLACK

Product Description:
KW2-B Two foot original FireStik CB antenna (Black)

Buy Now

Want to read more honest consumer review about 2' FIRESTIK ORIGINAL 5/8 WAVE BLACK now ?

7/15/2011

Motorola Signal Booster 4-Port BDA-S4 Cable Modem TV HDTV Amplifier Review

Motorola Signal Booster 4-Port BDA-S4 Cable Modem TV HDTV Amplifier
Average Reviews:

(More customer reviews)
This is the 4-port version of the Motorola Signal Booster, combining that product's high-quality 15 dB cable/antenna drop amplifier with an integrated 4-port splitter so you can use this device with up to four TVs (or a cable modem and three TVs) without having to buy a separate high-bandwidth signal splitter.

So who would benefit from a cable amplifier like this?Anyone who is having difficulty receiving a solid and reliable cable TV or cable modem signal is a candidate for the BDA-S4.But first check with your cable company to make sure they have done all they can to get a high quality cable feed into your home, with high quality cables, splitters and connectors. If they've "been there, done that," and you still notice frequent outages of your cable internet service, or pixilated (distorted) images on live or recorded TV shows from cable, then you may very well need a drop amp like this one.

This four-output amplifier is particularly helpful if you are splitting a cable signal coming into your house to multiple rooms for multiple TV feeds (and this is perfectly legal to do, per the Cable Act of 1992).Whenever you split a cable signal, you lose approximately 3 dB (decibels) of signal strength.Split a signal enough times and it can cause you to lose your cable modem feed or get sporadic distortion on your digital cable channels.Insert a cable amplifier like this into your cable feed as close as possible to where it enters the home and it will boost the signal enough to survive multiple splits and, in most cases, will allow you to enjoy a glitch-free cable TV signal throughout your home as well as a solid high-speed internet connection.

Why is this amp's "two-way" or "bi-directional" capability important?A two-way amp/splitter with "return" feed support is necessary in order to properly support a broadband cable modem (for data upload and download) and to enable interactive cable services such as PPV (pay per view) and interactive guides.A one-way amplifier will boost overall signal reception, but it will not work with a modem or interactive cable services.The BDA-S4 works perfectly with both.

The BDA-S4 won't work miracles.Again, always check your incoming signal, cable and connector quality first.But if you've done all that and are still having trouble, this little cable signal amp can be a real life-saver.It also works fine for OTA (over the air) HDTV signal amplification but only if you have a decent signal to begin with.A full review of the Motorola Signal Booster is available on Big Picture Big Sound's web site.Our writer's cable reception in Manhattan went from spotty to near perfect with this simple little amp. Highly recommended.

Click Here to see more reviews about: Motorola Signal Booster 4-Port BDA-S4 Cable Modem TV HDTV Amplifier

Product Description:
There is nothing worse than having a great TV to watch your favorite programs, while having a grainy or pixilated (digital cable) picture. Motorola BDA amplifiers give your TV signal a boost while maintaining full compatibility with all of your cable services. Simply install the BDA-S4 where your cable or antenna comes into your house and begin enjoying a better picture, faster downloads, and a more reliable HD or Digital TV signal. With a name like Motorola, how can you go wrong? The BDA-S4 is fully compatible with all cable TV standards, cable boxes, cable modems, routers, HDTV and more.

Buy Now

Want to read more honest consumer review about Motorola Signal Booster 4-Port BDA-S4 Cable Modem TV HDTV Amplifier now ?

5/06/2011

Hawking Hi-Gain Wireless-N Dual Radio Smart Repeater Review

Hawking Hi-Gain Wireless-N Dual Radio Smart Repeater
Average Reviews:

(More customer reviews)
I purchase the Hawking HW2R1 repeater in an attempt to extend wi-fi coverage to areas in my home that my Netgear WNDR3700 could not reach. Setup was easy with the Hawking CD and I initially placed the repeater between my computer and router. The computer at that point was close enough to the router that internet speed was 25mb/s from the router wi-fi but dropped to 3mb/s when connected to the repeater. Hawking tech support suggested resetting the router and repeater to channels 1, 6, 9, or 11 to see if the internet speed would improve. None of these channels improved the speed. Tech Support suggested waiting a couple of weeks to see if it improves. I did not think that would work so I looked for a better solution. It appeared that the repeater could not pick up the routers wi-fi signal as well as my laptop so I decided to hardwire the repeater to the router. This worked good. When hardwired to the router the repeaters wi-fi signal would provide internet speeds of about 20mb/s. The speed at the connection going into the repeater averaged 23mb/s so I am happy with this setup. The repeater and router are now located at opposite ends of the house and each provide adequate wi-fi for half of the house. I am disappointed that I had to hardwire the repeater to get it to pick up an adequate signal. I think Hawking should provide a better antenna without having to purchase an upgrade but am happy overall with the solution to my problem. Hawking tech support also could have been more knowledgeable.
Update: Another problem that I didn't notice when I first wrote the review is that computers in my house will not connect to the internet after reboot until I unplug and restart the repeater each time. The computers will connect to the repeater but not the internet. If I disconnect the repeater then the same computers will work fine when accessing the internet directly through the Netgear router so I know the problem is in the Hawking repeater. I have tried to resolve the problem for a couple of weeks and am having a very difficult time contacting the second level of tech support at Hawking. When transferred to 2nd level support I end up being left on hold for 15 minutes and then being forced to leave a message for a return call. I have not been able to get them to call me back so I am looking for another access point to replace the Hawking HW2R1.

Click Here to see more reviews about: Hawking Hi-Gain Wireless-N Dual Radio Smart Repeater

Product Description:
The Hi-Gain Wireless-N Dual Radio Smart Repeater is an advanced Wi-Fi connectivity solution that receives the signal of any 802.11b/g/n Wi-Fi network and rebroadcasts it locally within your home or office. The HW2R1 is the flagship product for Hawking's award-winning line of Hi-Gain Wi-Fi Range Extending products. Using two isolated Wi-Fi radios, the HW2R1 connects to your desired wireless Internet connection, such as a local Wi-Fi hot spot, neighborhood wireless network or office network and repeats the signal via a dedicated 300Mbps 802.11n Wi-Fi radio locally. With 3 upgradable Hi-Gain 3dbi omni-directional antennas (1 dedicated for receiving wireless signals and 2 dedicated for rebroadcasting wireless signals within your home or office) the HW2R1 can be outfitted with Hawking Hi-Gain antennas to boost the connection range with outside wireless networks as well as locally within your home or office. The HW2R1 is ideal for Wi-Fi connections to marine docks, RV parks, adjacent offices and homes with Wi-Fi networks or any other source for wireless internet connection. In addition, the HW2R1 provides security and functionality via a full featured firewall and router. The versatility of the Hi-Gain Smart Repeater makes it the perfect solution for any wireless application.

Buy NowGet 12% OFF

Want to read more honest consumer review about Hawking Hi-Gain Wireless-N Dual Radio Smart Repeater now ?

4/30/2011

Cobra HA-TA Hand-Held CB Antenna Review

Cobra HA-TA Hand-Held CB Antenna
Average Reviews:

(More customer reviews)
I bought this Cobra telescopic antenna for my Cobra Roadtrip handheld CB.It performs better than the included mini-whip, but it is not as sturdy as I'd like it to be.It has two parts, the lower part with a coil, and the upper screw-on telescopic antenna.The lower part with the coil is covered with a plastic layer and it seems like the coil under it it hasn't been soldered carefully, so there is a sharp bump under the plastic which might get exposed after longer usage and standar tear and wear.Fully extended, it measures about 27 inches, compared to the 11.5" in its folded state.It attaches to the handheld using its BNC connector which works perfectly for the Cobra handheld, but if you are buying this for some other CB radio with standard antenna connector you will need to buy the adapter. Bottom line - it works, but it could have been designed smoother.

Click Here to see more reviews about: Cobra HA-TA Hand-Held CB Antenna

Product Description:
This antenna will effectively give you double the range compared to thestandard antenna. This telescopic, high tensile strength antenna is made to take the wearand tear that professionals demand of their radio equipment. If you are a serious hand- held CB user, this accessory is a must-have.
What's in the Box
One HA-TA hand-held CB antenna and a one year warranty.

Buy NowGet 15% OFF

Want to read more honest consumer review about Cobra HA-TA Hand-Held CB Antenna now ?

4/19/2011

Cobra HG A 1500 Base-Load Medium Magnet Mount 300W CB Antenna Review

Cobra HG A 1500 Base-Load Medium Magnet Mount 300W CB Antenna
Average Reviews:

(More customer reviews)
This came properly packaged in a large cardboard box (no problems with damage in transit).I inserted the antenna whip into the base and tightened a set screw with the enclosed allen wrench.The magnetic mount held the antenna securely in the middle of the roof of our van.The cable was sufficiently long to run from the antenna, through the rear hatch door seal, down to the floor of the van, along the floor to the front seat where it attached to a cb radio.Since I did not have an SWR meter, I was not able to adjust the antenna.Even so, I was getting a good mile radius around me where I had solid radio contact (this is from a Cobra hand-held CB).Antenna stayed firm on the roof even though I was driving 70mph for much of the time.We got into some freezing rain which formed a layer of ice around the antenna (and that hurt transmission), but did not cause any damage to the antenna.

Click Here to see more reviews about: Cobra HG A 1500 Base-Load Medium Magnet Mount 300W CB Antenna

Product Description:
The Cobra HG A1500 is a base-load medium magnet count CB antenna with 300 watt power handling capability, and 26-30 MHz frequency range. It comes weather channel capable with SO 239 connector, black stainless steel whip and hardware, matched braided coaxial cable, and a scratch-resistant base pad.

Buy Now

Want to read more honest consumer review about Cobra HG A 1500 Base-Load Medium Magnet Mount 300W CB Antenna now ?

1/26/2011

Midland 1001Z 40-Channel CB Radio Review

Midland 1001Z 40-Channel CB Radio
Average Reviews:

(More customer reviews)
So, you're sitting there viewing this page in your browser, perhaps with a look of doubt in your face.That's why you've scrolled down here to the reviews.You're thinking to yourself "A $30 CB?It can't be worth a flip, right?".I tell ya what, I was thinking the same thing.But I gave it a shot and installed it in my wife's little '97 Corolla a few days ago, and so far I've been pretty impressed.

When I pulled it out of its box, my first thought was "Wow, cheap".And indeed it is.Its plastic case has almost no weight to it.The knobs and switches have the tactile feedback of a dirt-cheap appliance from Wal-Mart.Being the ham radio geek that I am, the first thing I did was pull out my trusty phillips screwdriver and open the case.More cheapness on the inside, all of the components no doubt obtained from the lowest bidder somewhere in Asia.However, I didn't see any sign of shoddy manufacturing that I've seen in other super-cheap products.No solder marbles shaking around inside, no apparent bad solder joints, components all in good shape, and everything seems to fit and function well.I put it back together.

Time to install.I spent an hour measuring and cutting a hole in the plastic tray beneath the stereo in our little Corolla to accommodate the length of the unit ; slid it in and secured it with 3M double sided tape.It looks pretty good, non obtrusive, black case matching the rest of the plastic in the car.It will no doubt fit will in other small cars too.After some snipping and soldering, I had power from the backside of the cigarette lighter.I temporarily attached my antenna (more on antennas later) and turned it on.

My main gripe is the channel knob.The flimsiness of the channel knob is really the only giveaway as to just how cheap of a radio this is.It "clacks" when you turn it, and feels like a child's toy when you do so.The channel doesn't change with every "clack", it could be 2 clacks or one clack before it actually changes.But, it works.And it doesn't feel like it's about to fall off or fly apart, so I'll let it slide.I go to channel 19 and key the mic to ask for a radio check.A trucker on I-20 about 5 miles away tells me it's working fine and sounds OK.I mention that it cost $30, and we share a laugh.That's when I notice my huge metal garage door is still closed.Nice, the radio works pretty well.I was worried that I wouldn't be able to hear the speaker since I mounted it flush with the plastic in the dash, speaker covered.I had even bought a $10 cheapo extension speaker from Amazon with the radio.But it's still pretty loud!And it doesn't sound too bad when I crank up the volume.Not bad!I declined to install my extension speaker...for now at least.

So I install my mag mount antenna on the truck, tuck the wires in, and put everything back together.Let me give you some radio nerd advice about antennas, because there seems to be lots of confusion about this in CB world.A -LEGAL- CB radio puts out 4 watts AM.That's it.All of them, expensive or inexpensive, doesn't matter...4 watts AM if it's legal.And if you want it to "get out", then you need to squeeze out each of those 4 watts as best as possible.The CB band is around 27 MHZ, or around 12 meters.Boring technicalities aside, it basically means you need a "large" antenna for best efficiency.The absolute best CB antenna ever made is the good ol' 102" whip.You can order them from Radio Shack for about $20.But 102" is huge, and unless you're driving a big truck, it will probably look bad.The second-best antenna you can get, in my opinion, is the Wilson 1000.It has a 62" whip, which is pretty long but doesn't look too bad on a car.They come in mag mount or permanent mount.I'm using a mag mount.Now once you've got the antenna installed, you're not finished.You need to tune it for a good SWR.Go buy a cheapo SWR meter and a small piece of coax from your local CB shop or truck stop, read some directions on the internet, and tune that thing as best as you can get it.The local CB shop might even do it for you if they're nice.It WILL make a difference, and you need all the help you can get when you're only running 4 watts.

So, now I have everything installed, antenna tuned, and it looks nice.I start up the car out and cruise around town.I chat with a few other locals in town, as well as truckers passing by on I-20.This little radio is working just as well as my "big" CB in my other car, which cost almost 3 times as much.It doesn't look fancy or have all the features that one does, but when it comes to just plain talking, this cheap guy gets the job done admirably.Someone in another review mentioned how well the squelch works and I can confirm that.This radio may be cheap, but function-wise it works great.The only "dumb" design decision I've noticed is that the speaker shuts off if you unplug the mic.But that doesn't effect you really, you need a mic to use a CB anyway.

Wow, this got pretty long, but hopefully it'll help someone out there.If you want a basic CB to do basic CB stuff and don't want to spend a lot of money; go ahead and buy this one.I'll give it 4 stars, deducting only for the flimsy feeling of the channel knob and switches.It's one of the best values I've ever come across in all my years of goofing around with radio.Just remember though, it's all about the antenna.Get a nice long one and tune it as best as you can, and this radio will serve you well.

Click Here to see more reviews about: Midland 1001Z 40-Channel CB Radio

Product Description:
The Midland 1001Z two-way, 40-channel CB radio represents the state of the art in CB engineering. Incorporating microprocessor controlled PLL circuitry for precise tuning, it boasts 4 Watts of power, an emergency channel, digital power signal strength meter, squelch control, external speaker and PA speaker jacks, and plenty more. Installation is a breeze in most cars, trucks and RVs. Perfect for novices and long-time CB users alike.


Perfect for novices and long-time CB users alike. Click to enlarge.
View front panel control diagram. Click to enlarge.
View microphone details. Click to enlarge.

1001Z Features


4 Watt Output Power
The maximum power allowed to give you the maximum communication range.
CB/pa switch
Allows the CB to be used as a Public Address System when paired with a PA speaker.
Instant Channel 9
Immediate access to emergency - channel 9.
RF Gain
Adjusts reception sensitivity range for clear communication.
Front panel locking mic connector
Easy to connect microphone locks securely to CB.
Digital Power meter
Displays incoming signal strength and RF output power.
Squelch control
Removes background noise.
LED Display
Large high-intensity channel readout. Easy to read day or night.
Controls
On/OFF/Volume knob, Squelch knob, RF Gain knob, Tuning knob, CB/PA switch, Instant Channel 9 switch
Jacks and connectors
4 pin locking mic connector, antenna connector, external speaker connector, PA speaker connector and DC power cord connector.

Midland Radio Corporation

Midland Radio Corporation is an international industry leader in wireless communications with affiliates in Italy, Bulgaria, Germany, Poland, Russia, Spain, and the United Kingdom, as well as representation in Latin America.Midland develops high quality consumer products such as GMRS Two-Way Radios, Citizen Band (CB) Radios, Marine Radios, Bluetooth intercom systems, and All Hazards/Weather Alert Radios.Also, as a leading manufacturer of Land Mobile Radios, Midland supplies professional grade analog and digital (P25 Technology) Portables, Mobiles and Base Stations/Repeaters for government entities such as forestry, public safety, and other commercial users.
Known in the '70s primarily for CB radios and household electronics, Midland has grown with the times by producing innovative new communications products and by actively promoting public emergency preparedness. Midland has manufactured quality Two-Way Radios for the last 50 years and is a market leader in several individual categories.

What's in the Box

1001Z CB Radio, Microphone, Mounting Bracket and Hardware, Owner's Manual

Buy NowGet 47% OFF

Want to read more honest consumer review about Midland 1001Z 40-Channel CB Radio now ?