Showing posts with label recommended. Show all posts
Showing posts with label recommended. Show all posts

3/29/2012

Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier Review

Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier
Average Reviews:

(More customer reviews)
I really appreciate feedback on Amazon (as well as other places) to help me make my purchasing decisions. I've rarely been steered wrong and I try to help out as well with my honest feedback. Now while it SAYS this amp is rated for 700/1400 watts we all should know that for the price listed that is HIGHLY unlikely. Surely they're basing it on "Peak Output" instead of the much more realistic RMS rating.

I bought this for my wife's truck to go with the 10" Pyle bandpass box. I haven't installed either yet but I did want to let you know the more detailed specification info listed inside the box.

Output power @ 14.4v DC, 1Khz

RMS power @ 4 Ohms - 80w x 2
RMS power @ 2 Ohms - 140w x 2
Max power output - 700w x 2 (I'm assuming that's the math they're using to get the "1400" rating)
RMS bridged power output @ 4 Ohms - 160w x 1

I'll post more once it's installed and (hopefully) thumping!

Click Here to see more reviews about: Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier

Product Description:
The Pyle PLA2200 1400W 2-Channel Chopper high performance car amplifier extends the Pyle tradition into a totally new series of amp, designed from the ground up to deliver the power, performance, and flexibility the modern car enthusiast demands. Providing high-end performance at an affordable price, Pyle products offer hard-to-find features customers demand. These components will provide the professional and occasional enthusiast with an unbeatable combination of performance, flexibility and price.

High-end performance at an affordable price.
Click to enlarge.


Click to view features and controls.

Bass Boost Level Control
Permits adjustment of the bass level up to an increase of approximately up to 18dB.
Crossover Mode Selector
When used with normal, full range system, set this switch to "Full". If you wish to use the internal crossover to power a driver or specific frequency range, use the "LPF" or HPF" for the "Low Pass" or "High Pass" settings.
Input Level Controls
Enables the matching of levels to the output levels from the head unit (or other original source). The input sensitivity of adjustment ranges from 6V to 200mV.
Sub Sonic Control
When the sub sonic selector switch is in "On" mode, this filter control permits continuously variable adjustment from 10 to 100Hz.
Aux Line Outs
This amp features gold plated RCA Jacks for Aux line outputs. Use these outputs for unlimited systems expansion. Power Terminals
These connectors will deliver power, ground, and remote turn-on control to the amplifier.
Speaker Terminals
These terminals are 14K gold plated to guarantee high conductivity and minimum signal
Features include:

    Variable Hi/Lo Electronic Crossover Network
    Variable Input Level (Gain) Control
    Switchable Bass Boost
    Power and Protection LED Indicators
    Low Level Inputs
    Gold Plated RCA Inputs and Outputs
    Slim Size Amplifier Design For Easy Installation
    Thermal / Overload / Short Circuit Protection
    Anti-Thump Turn-on
    Soft Turn-On Circuit
    Remote Turn On/Off

What's in the Box
Pyle PLA2200 1400W 2-Channel Chopper high performance car amplifier, manual

Buy NowGet 52% OFF

Want to read more honest consumer review about Pyle PLA2200 2-Channel 1400-Watt Bridgeable Mosfet Amplifier now ?

3/29/2011

MURS TWO-WAY BASE STATION RADIO Review

MURS TWO-WAY BASE STATION RADIO
Average Reviews:

(More customer reviews)
At least to my knowledge. With only a wire Jpole antenna ( Thats inside) I have spoken to friends over seven miles away clearly!
Now Remember I am higher then they are, Much higher. I ordered a 5/8's wave antenna for the roof. This should give me much greater range . I love these simple to use transmitters and plan on buying two HT's when I have the extra cash. Even my 3 year old neice has figured out how to answer me when away from home. So I am betting the wife can also :)

Click Here to see more reviews about: MURS TWO-WAY BASE STATION RADIO

Product Description:
- Dakota Alert MURS two-way base station radio/ >- 5 Channels and 38 sub channels/ >- License not FCC required/ >- Normally open (N/O) relay output- Relay can be used to connect the base station to other existing systems such as alarm panels or even doorbells- Many different applications for small businesses, farmers, security guards, outdoorsmen; anyone who needs to have real time monitoring and two way voice communications will benefit from MURS- Base station MURS transceiver that will receive alert signals from the MURS Alert transmitter and also can be used for two way voice communications between other MURS transceivers- Powered by a plug-in transformer- Capable of communicating over distances of several miles- When an alert signal is received from the MURS Alert transmitter, the BS will sound off with the voice of the alert signal and will also display an alert icon as a visual display that an alert signal has been received- Can also be used to communicate with the M538-HT hand held radio (allows someone in the house or shop to be in direct contact with someone out and about in the field)/ >/ >DKM538BS

Buy NowGet 16% OFF

Want to read more honest consumer review about MURS TWO-WAY BASE STATION RADIO now ?

1/26/2011

Midland 1001Z 40-Channel CB Radio Review

Midland 1001Z 40-Channel CB Radio
Average Reviews:

(More customer reviews)
So, you're sitting there viewing this page in your browser, perhaps with a look of doubt in your face.That's why you've scrolled down here to the reviews.You're thinking to yourself "A $30 CB?It can't be worth a flip, right?".I tell ya what, I was thinking the same thing.But I gave it a shot and installed it in my wife's little '97 Corolla a few days ago, and so far I've been pretty impressed.

When I pulled it out of its box, my first thought was "Wow, cheap".And indeed it is.Its plastic case has almost no weight to it.The knobs and switches have the tactile feedback of a dirt-cheap appliance from Wal-Mart.Being the ham radio geek that I am, the first thing I did was pull out my trusty phillips screwdriver and open the case.More cheapness on the inside, all of the components no doubt obtained from the lowest bidder somewhere in Asia.However, I didn't see any sign of shoddy manufacturing that I've seen in other super-cheap products.No solder marbles shaking around inside, no apparent bad solder joints, components all in good shape, and everything seems to fit and function well.I put it back together.

Time to install.I spent an hour measuring and cutting a hole in the plastic tray beneath the stereo in our little Corolla to accommodate the length of the unit ; slid it in and secured it with 3M double sided tape.It looks pretty good, non obtrusive, black case matching the rest of the plastic in the car.It will no doubt fit will in other small cars too.After some snipping and soldering, I had power from the backside of the cigarette lighter.I temporarily attached my antenna (more on antennas later) and turned it on.

My main gripe is the channel knob.The flimsiness of the channel knob is really the only giveaway as to just how cheap of a radio this is.It "clacks" when you turn it, and feels like a child's toy when you do so.The channel doesn't change with every "clack", it could be 2 clacks or one clack before it actually changes.But, it works.And it doesn't feel like it's about to fall off or fly apart, so I'll let it slide.I go to channel 19 and key the mic to ask for a radio check.A trucker on I-20 about 5 miles away tells me it's working fine and sounds OK.I mention that it cost $30, and we share a laugh.That's when I notice my huge metal garage door is still closed.Nice, the radio works pretty well.I was worried that I wouldn't be able to hear the speaker since I mounted it flush with the plastic in the dash, speaker covered.I had even bought a $10 cheapo extension speaker from Amazon with the radio.But it's still pretty loud!And it doesn't sound too bad when I crank up the volume.Not bad!I declined to install my extension speaker...for now at least.

So I install my mag mount antenna on the truck, tuck the wires in, and put everything back together.Let me give you some radio nerd advice about antennas, because there seems to be lots of confusion about this in CB world.A -LEGAL- CB radio puts out 4 watts AM.That's it.All of them, expensive or inexpensive, doesn't matter...4 watts AM if it's legal.And if you want it to "get out", then you need to squeeze out each of those 4 watts as best as possible.The CB band is around 27 MHZ, or around 12 meters.Boring technicalities aside, it basically means you need a "large" antenna for best efficiency.The absolute best CB antenna ever made is the good ol' 102" whip.You can order them from Radio Shack for about $20.But 102" is huge, and unless you're driving a big truck, it will probably look bad.The second-best antenna you can get, in my opinion, is the Wilson 1000.It has a 62" whip, which is pretty long but doesn't look too bad on a car.They come in mag mount or permanent mount.I'm using a mag mount.Now once you've got the antenna installed, you're not finished.You need to tune it for a good SWR.Go buy a cheapo SWR meter and a small piece of coax from your local CB shop or truck stop, read some directions on the internet, and tune that thing as best as you can get it.The local CB shop might even do it for you if they're nice.It WILL make a difference, and you need all the help you can get when you're only running 4 watts.

So, now I have everything installed, antenna tuned, and it looks nice.I start up the car out and cruise around town.I chat with a few other locals in town, as well as truckers passing by on I-20.This little radio is working just as well as my "big" CB in my other car, which cost almost 3 times as much.It doesn't look fancy or have all the features that one does, but when it comes to just plain talking, this cheap guy gets the job done admirably.Someone in another review mentioned how well the squelch works and I can confirm that.This radio may be cheap, but function-wise it works great.The only "dumb" design decision I've noticed is that the speaker shuts off if you unplug the mic.But that doesn't effect you really, you need a mic to use a CB anyway.

Wow, this got pretty long, but hopefully it'll help someone out there.If you want a basic CB to do basic CB stuff and don't want to spend a lot of money; go ahead and buy this one.I'll give it 4 stars, deducting only for the flimsy feeling of the channel knob and switches.It's one of the best values I've ever come across in all my years of goofing around with radio.Just remember though, it's all about the antenna.Get a nice long one and tune it as best as you can, and this radio will serve you well.

Click Here to see more reviews about: Midland 1001Z 40-Channel CB Radio

Product Description:
The Midland 1001Z two-way, 40-channel CB radio represents the state of the art in CB engineering. Incorporating microprocessor controlled PLL circuitry for precise tuning, it boasts 4 Watts of power, an emergency channel, digital power signal strength meter, squelch control, external speaker and PA speaker jacks, and plenty more. Installation is a breeze in most cars, trucks and RVs. Perfect for novices and long-time CB users alike.


Perfect for novices and long-time CB users alike. Click to enlarge.
View front panel control diagram. Click to enlarge.
View microphone details. Click to enlarge.

1001Z Features


4 Watt Output Power
The maximum power allowed to give you the maximum communication range.
CB/pa switch
Allows the CB to be used as a Public Address System when paired with a PA speaker.
Instant Channel 9
Immediate access to emergency - channel 9.
RF Gain
Adjusts reception sensitivity range for clear communication.
Front panel locking mic connector
Easy to connect microphone locks securely to CB.
Digital Power meter
Displays incoming signal strength and RF output power.
Squelch control
Removes background noise.
LED Display
Large high-intensity channel readout. Easy to read day or night.
Controls
On/OFF/Volume knob, Squelch knob, RF Gain knob, Tuning knob, CB/PA switch, Instant Channel 9 switch
Jacks and connectors
4 pin locking mic connector, antenna connector, external speaker connector, PA speaker connector and DC power cord connector.

Midland Radio Corporation

Midland Radio Corporation is an international industry leader in wireless communications with affiliates in Italy, Bulgaria, Germany, Poland, Russia, Spain, and the United Kingdom, as well as representation in Latin America.Midland develops high quality consumer products such as GMRS Two-Way Radios, Citizen Band (CB) Radios, Marine Radios, Bluetooth intercom systems, and All Hazards/Weather Alert Radios.Also, as a leading manufacturer of Land Mobile Radios, Midland supplies professional grade analog and digital (P25 Technology) Portables, Mobiles and Base Stations/Repeaters for government entities such as forestry, public safety, and other commercial users.
Known in the '70s primarily for CB radios and household electronics, Midland has grown with the times by producing innovative new communications products and by actively promoting public emergency preparedness. Midland has manufactured quality Two-Way Radios for the last 50 years and is a market leader in several individual categories.

What's in the Box

1001Z CB Radio, Microphone, Mounting Bracket and Hardware, Owner's Manual

Buy NowGet 47% OFF

Want to read more honest consumer review about Midland 1001Z 40-Channel CB Radio now ?